26 years of experience in R&D and production of printing advertising equipment
+86 0373-732 8999
In the past few days, the country has experienced a round of heavy rainfall, is about to usher in the arrival of the Dragon Boat Festival, for the summer weather changes, frequent rain season, remember in the Dragon Boat Festival activities at the same time, the photo machine for effective maintenance work. The influence of wet and rainy weather on the photo machine can not be underestimated, the humidity of the working environment of the photo machine is too high, which will cause condensation and liquefaction of moisture, which is easy to cause vertical lines, shielding, plugging and other phenomena in the printing process of the photo machine nozzle.
Therefore, the daily maintenance work of the photo machine needs special attention, and the following Audley Xiaobian shares how to avoid damage to the photo machine nozzle in wet weather.
Photo machine before turning on
Before starting every day, be sure to use a hair dryer to cool the photo machine motherboard, the small car board and the data cable interface at both ends5-10Minutes, keep the board and precision electronic accessories dry, thereby reducing the impact of humid climate, avoid nozzle shielding and ink blocking phenomenon.
Pay attention to indoor rain and moisture proof, it is recommended to configure a dehumidifier in the indoor workplace of the photo machine, or turn on the dehumidification mode of the air conditioner. The photo machine should not be close to the wall or the glass, to avoid the wall return, and the glass water vapor liquefaction will affect the machine.
Photo machine in operation
The air humidity will slow down the dryness of the printing pattern of the photo machine, which will cause the surface damage of the pattern and the coating bias in the later period, which will bring great problems to the improvement of production efficiency. It is recommended to turn on the heating and external drying functions in the photo work, and appropriately reduce the printing speed to improve the drying of the pattern surface.
When the photo machine replaces or places the material, it is necessary to choose the appropriate storage method to avoid the printing medium absorbing moisture and moisture, which causes the ink to dissolve and ooze during printing, affecting the actual printing effect. It is recommended that the printing material be put back into the original packaging and sealed after use, and try not to contact with the ground and walls.
After the photo machine shuts down
In the morning and evening, we should pay attention to close the doors and Windows to prevent the outside humid air from entering the room, and we can open the doors and Windows for ventilation after the weather clears up.
The machine is placed in a cool, backlit position to avoid high temperature and direct sunlight, and the indoor temperature is at19℃-32℃, humidity is25%-70%.
When the photo does not work for a long time, you can choose to power off and moisturize, do not let the photo machine has been in a standby state, affecting the life of the photo machine.
On a weekly basis, clean the internal and external health of the photo machine, especially in key positions such as the head and guide rail6SThe management keeps the whole clean. Do not place any irrelevant items above or around the frame of the photo machine to prevent the stability of the photo machine.
The above is in the hot summer photo machine need to pay attention to maintenance measures, I hope everyone can pay attention to it. In summer, the Odley photo machine nozzle appears shielding, color does not ink and other phenomena occur, to shut down, check the photo machine and contact technical personnel can reduce the damage of the nozzle. If you have any questions, you can consult Audley official website customer service or call the national toll-free hotline400-6179998Learn more!
High speed sprinkler :I3200 high speed sprinkler, compatibility: weak solvent, water, thermal sublimation, UV Dual-head configuration: true high-speed printing, 75 square per hour; Control system: the most stable domestic board control system; Silent linear guide: imported silent linear guide, more stable machine movement 1 longer service life; Anti-scratch device: prevent the material from lifting the scratch nozzle, effectively protect the nozzle; Intelligent heating: Dual infrared heating: reduce drying time, speed up paper delivery efficiency, ensure high-speed printing; New frame design: mold appearance new aluminum alloy body structure design, effectively improve the picture printing quality; The height of the trolley frame adjustment: according to the thickness of the material, adjust the height of the nozzle, convenient for users to use more media; Silent linear guide: imported silent linear guide, more stable machine movement, longer service life;
1.With Epsoni3200-A1/E1Original authentic sprinkler head 2.Imported silent linear guide rail: no noise, more stable movement, more stable printing, extend the service life of the machine. 3.All aluminum lifting ink stack: automatic lifting ink stack, tighter sealing and long-term moisturizing, automatic cleaning Settings, cleaner and simpler printing. 4.German Igus chain, the movement is silent more stable. 5.Three speed adjustable press wheel, prevent static electricity does not fly ink, printing size is more accurate, no wrinkles.
With Epsoni3200-U1Nozzle, four-head configuration, high precision mode can be reached32㎡/h, production mode48㎡/h. Platform three zones adjustable suction, high power water coolingUVLights. Head automatic height measurement, anti-collision protection, nozzle independent constant temperature system. Heavy-duty pneumatic expansion shaft, rolling simple discharge system, large bearing weight, long service life, uniform retracting and discharging materials.
Wechat public account
Audley Tiktok